Cart

Banner

SPS 1100 ADV RT2

Sale!

SPS 1100 ADV RT2

£225.00 £220.00 Excluding VAT

Featuring

Performances
Line-interactive technology with sine-wave output. Permanent AVR stabilisation. Output power factor PF=0.9. Control panel with swivel mount LCD display and keypad. Convertible tower/rack format (2U). Includes pedestal (pedestal mount) and lugs (rack mount). Backup extensions available for all power ratings. UPS models with extra charger for backup extensions. RS-232/USB-HID interface. Downloadable monitoring software for Windows, Linux and Mac. Smart slot for SNMP/potential-free contacts/MODBUS. ADSL/fax/modem protection. EPO – emergency power off. Programmable outputs for critical/non-critical loads. Manual and automatic battery test. Smart battery charger to shorten average recharging times. Battery recharging with device turned off. SLC Greenergy solution.

If you would like to discuss your requirements then please contact us for free on 0800 625 0052 or email sales@protectpowersystems.com

3 in stock

Share this product

Description

Salicru’s SPS ADVANCE RT2 series is a range of UPS featuring line-interactive technology with sine-wave output voltage and convertible tower/rack format, the height being only 2U for all power ratings. In addition, its output power factor of 0.9 and compatibility with APFC (active power factor correction) type loads make it the best option for any type of load that requires protection.

In terms of communications, it features an RS-232/USB interface (compatible with HID protocol) and a smart slot that can optionally hold an SNMP card, MODBUS or potential-free contacts; also available are software packages for local or virtual monitoring and management of protected devices.

And other outstanding features include: solutions for applications with long backup (by means of equipment with extra chargers and additional battery modules), swivel mount display and adapters (pedestal and lugs) for placing in tower or rack formats and programmable outputs (critical/non-critical loads) to extend the available backup.

The power range for the SPS ADVANCE RT2 series is: 800, 1,100, 1,500, 2,000 and 3,000 VA.

Technical Specification

Technical specifications
TECHNOLOGY
Line-interactive with sine-wave output
FORMAT
Convertible tower/rack (2U)
INPUT
Rated voltage
208 / 220 / 230 / 240 V
Voltage range 100% load
170 ÷ 280 V
Stabiliser
AVR (Buck & Boost)
Rated frequency
50 / 60 Hz (auto-detection)
Frequency range
±5 Hz
Auto~detection of frequency
Yes
Protection
Fuse (800/1100) or resettable thermal cutoff (1500/2000/3000)
OUTPUT
Power factor
0.9
Rated voltage
208 / 220 / 230 / 240 V
Voltage accuracy (battery mode)
±1.5%
Power (VA/W)
1100 / 990
Total harmonic distortion (THDv)
< 2% linear load / < 5% non-linear load
Waveform (battery mode)
Pure sine wave
Frequency
50/60 Hz (same as input)
Frequency accuracy (battery mode)
±0.1Hz
Admissible overloads in battery mode
< 120% off at 1 min / < 150% off at 10 s
Admissible overloads in on-line mode
< 120% off at 5 min / < 150% off at 10 s / >150 %: 1 s
Socket type
IEC
No. Of sockets
8
Programmable sockets
Yes, for critical / non-critical loads (4/4)
BATTERY
Battery type
Pb-Ca sealed, AGM, maintenance-free
Charge type
I/U (constant current/constant voltage)
Recharge time
4 hours to 90%
Battery test
Automatic on every start + one x week
CHARGER
Temperature voltage compensation
Yes
COMMUNICATION
Ports
RS-232/USB-HID
Intelligent slot
Slot for SNMP/potential-free contacts/ MODBUS
Monitoring software
For Windows, Linux and Mac
INDICATIONS
Type
LCD + keypad
Values
Voltage, power and input and output frequency / Battery voltage / % battery charge / % load / Operating mode / Fault / Discharge time / Mute
Operating modes
Normal / Stabilisation (AVR) / Battery / Fault
Alarm
Output battery mode, polarity, low battery (back up time), charger failure and overload
Audible
Every 10 s for battery operation. Every 2 s for low battery / Polarity. Every 1 s for overcharge. Continuous for fault.
Failure
Display LCD
OTHER FUNCTIONS
Cold start (start-up from batteries)
Yes
Emergency stop (EPO)
Yes
ADSL/fax/modem transient protector
Yes
Green-function
Yes, automatic stop in battery mode with load <5%
Smart fan speed
Yes, smart control of fan speed
Site wiring fault
Yes, error detection of phase-neutral rotation and/or absence of earth
GENERAL
Operating temperature
0º C ÷ 40º C
Relative humidity
Up to 95%, non-condensing
Maxium operating altitude
2,400 masl (power degradation up to 5,000 m)
Acoustic noise at 1 metre
< 45dB
STANDARDS
Safety
EN-IEC 62040-1
Electromagnetic compatibility (EMC)
EN 62040-2:2006(C2)
Operation
EN 62040-3:2011
Quality and environmental management
ISO-9001 & ISO-14001
DIMENSIONS
Depth (mm)
410
Width (mm)
438
Height (mm)
88
WEIGHT
Weight (kg)
13,4

Additional Information

For further information & technical data & software please visit Salicru Website Here

Reviews

There are no reviews yet.

Be the first to review “SPS 1100 ADV RT2”